Kamis, 23 Desember 2010

Jon Boat Painting Tips & Tricks

Jon boats are flat bottomed boats that come in a standard flat bottom sheet set and modified V-arc version. They are prepared to accommodate the use of shallow water and fishing. Aluminum is the material used in the manufacture of light water, maneuverable and durable art. Painting your boat Jon is a construction and maintenance techniques. Some hunting boats are painted in a camouflage pattern, to be harmonious in the area.

aluminum boat rivets Input of water occurs during or shortly after loading the boat on a trailer is again an indication that the rivets are loose. Welded aluminum boats do not have this problem. Solving the problem is not difficult and should be done before painting. The paint alone will not cure many of the problems of leakage. Turn the boat upside down on two blocks. to pull a heavy sledge hammer on the head of the rivet, the rivet head mounted on the outside of the boat. Work your way around the boat, tightening all the rivets.


Surface Preparation Preparation of the surface is essential for a professional-looking work. Sand the entire floor of the boat, removing dirt and grime. Wash the pot with water and soap with a stiff brush to get rid of the debris left from grinding. Rinse the boat with a pressure washer or hose pressurized water. Allow the boat to dry completely.


Priming Paint primer for aluminum oxide ships must of primary aluminum, and not only includes a manual, aluminum oxide. The best results from the primary case with the water gun or a stun gun airless spray may be applied. These methods of painting by Ernst deliver the best results, but seriously with a brush or roller and do the job properly. Wait 10 to 12 hours of the primer to dry completely.


Painting To ensure a good professional job with a good automotive paint, either with the water gun jet or electric airless equipment. Car paint is waterproof, made of metal, and I'm seriously annually car wax layer easily. Again, with a brush or roller and Ernst all carry out the work properly. Both methods provide a flat surface, the spray should be easy to achieve. Scheduled for May camouflage four or five steps to the right color combination to get. Complete the project by applying a clear coat to protect the paint.


Interior painting If you want inside your Jon boat in the end all the work, follow the same procedure to paint the exterior paint of the boat. Apply a non-slip surface in the interior of jon boat. With a brush or roller with sand on the undercard of the slip surface. Let the first 10 to 12 hours to be completely dry before painting.

Tidak ada komentar:

Posting Komentar