How To Wash An Aluminum Boat Hull

Learning how to wash an aluminum boat hull is an important part of boat ownership. Anyone with a boat should know how to clean it, as boats that are constantly cleaned tend to fare much better than those that are neglected after use. The following advice will help you wash your aluminum boat hull effectively.
To wash an aluminum boat hull, you will need:

• A hose with a nozzle
• A scrub brush
• Dish soap
• A bucket
• A sponge
• A boat trailer

1. Before washing your aluminum boat hull, first buy all of the materials that you might need. Then, bring your boat up onto land on the trailer for cleaning.
2. If your boat has been in saltwater, it is important to get started at once. Spray your boat down well with the hose. This should take at least five minutes, so be thorough, and hit everywhere on the hull.
3. Mix some soapy water, using a little dish soap, in the bucket. Dip the brush into the bucket and scrub the hull all over. If you see stains, focus on them.
4. If stains prevail through the initial rinsing and the scrubbing, apply a little elbow grease. You may need to wait a couple of minutes, and then scrub firmly with the brush or sponge. The sponge is better for tough stains, as you can firmly use your hand to grind them off of the hull. This technique should remove even the toughest boat hull stains.
5. Once you have rinsed, scrubbed and removed stains from your boat, give it another rinse. Make sure to remove all of the soapy water from the aluminum hull. You will know when there is no more soap because no more bubbles will show as your are spraying the boat. Then, leave it to dry, and repeat the cleaning process periodically, ideally each time after using the boat.

Learning how to wash an aluminum boat hull is important for any owner of a craft of this type. Clean your boat's hull after each use, and be through, as this is one of the best ways to maintain your boat's great condition.